Ask Question
This is a product that has been a huge hit for all the sedan drifters out there. A complete bolt-on kit for the IS300 and Gen2 GS SC430 to remove the drum parking brake and replace it with a 4-piston Wilwood DYNALITE Aluminum caliper. Just add a handbrake with a master cylinder and you are ready to go. Or use one of ours!
Features:
- Retains use of stock IS300 calipers and pads for the primary brake.
- 3/8" Steel laser-cut bracket with thread nuts TIG welded in allowing blind mounting.
- 3-point mount to spindle assures planar stability under load.
- Positioned with plenty of clearance for brake line exit and routing away from moving components.
- Shoulder bolt spindle mounting for highest shear resistance possible.
- All caliper mounting hardware included. Safety wire fasteners or standard bolts.
- Includes plumbing kit for connecto all the way to the hydraulic handle of choice up front (1/8-NPT male).
- Includes 2 Wilwood calipers with pads.
We have a Dual Wilwood setup available as well for those that would like to remove the stock IS300 calipers and provides a second set of Wilwood calipers to replace the factory brakes and pads..
Installation:
-Removal of all rear drum hardware and dust shield is required.
-Once removed all surfaces should be cleaned on 3 mounting holes that are used.
-Thread in 2 M10 shoulder bolts with Belleville washers into welded nuts from the backside, keep loose.
-Thread in M10x1.25 Flange bolt and M10 washer into threaded spindle hole.
-Torque 2 shoulder bolts to 22-ft-lbs.
-Torque M10x1.25 cap screw to 1/4" turn past flush since torque wrench will not fit here.
-Mount OE rotor and caliper and torque to factory specs.
-Mount Wilwood caliper with 2 3/8" bolts and torque to 35-ft-lbs.
-Verify caliper is concentric and pads contact rotor correctly.
-Safety wire hardware is optional and used to protect against back out. Or use the standard bolts.
-If plumbing is purchased route plumbing to tee joint and route single line to master cylinder handle.
-Bleed system using the highest bleeder valves and start with the farthest valve.
Lexus | SC430 | 2002-2010 | |
Lexus | IS300 | 2001-2005 | |
Lexus | GS430 | 2001-2005 | |
Lexus | GS400 | 1998-2000 | |
Lexus | GS300 | 1998-2005 |
HYDRAULIC (DRIFT) E-BRAKE KIT IS300 GEN2 GS SC430 SINGLE WILWOOD
- Brand: FIGS Engineering
- Product Code: G1155
- Availability: In Stock
-
$780.57
Available Options
Related Products
Tags: hydraulic, ebrake, handbrake, hand, brake, ebrake, hydro, handle, cylinder, drift, is300, is200, altezza, gs, gs300, gs400, gs430, sc430, wilwood, drifting, sxe10, jce10, jsz160, jsz161, dual, caliper