Ask Question
Why: The stock rear toe links on the IS300/Gen2 GS/ SC430, JZX110 Chassis are a significant cause of inner tire wear and even worse the inner subframe adjustment mounts can become damaged making an alignment a crap shoot. FIGS has taken a long time to develop an OEM quality solution that allows easy adjustment, long product service life and the most control over the rear toe geometry of any similar product on the market. We maintained the strength of the system with absolutely no weldment at the rod end interface unlike cheaper alternatives offered by import companies. That means a single piece thread stud integrated with the bearing for maximum strength. Tapered studs are precision machined from SUS 304 for maximum strength. FIGS designed our own tapered studs for maximum clearance of the rod end during travel yet close enough to the mount to not incur unnecessary additional bump steer. Toe Links from FIGS also allow serviceability should the rod end wear and need replacing. These compliment our MEGA arms by providing a balanced rear steering strategy under bump, making them an obvious choice for discriminating race teams and club cars.
SET = 2 Toe links 1 for each side
Location: Frontside middle of rear suspension.
Influence: Rear steering under compression
Features:
- Length adjustment of up to 1.5" without removing from vehicle.
- Increases the arc length of the rear toe linkage to reduce bump deflection.
- Infinite fine toe adjustment to overcome stock eccentric mounts that are worn or bent.
- Precision rod ends provide the strength for Track vehicles.
- Top quality materials and workmanship mean you are buying the best product on the market compared to low quality competing parts. No welds at the bearing interface, premium bearing options for long service life.
Specs
- Monolithic tapered stud assembly is stronger than stock ball joint.
- SUS303 FIGS rod end spacers for precision chassis mount.
- Swaged 1" SAE 1012 steel tubing for reduced weight and increased strength. Knurled for grip and yellow zinc or Black Dichromate finish for corrosion resistance.
- Includes tubing for alignment gripping and coated clamps for ABS sensors.
- Rubber Boots available as a special order. NOTE that this means more maintenance. Rubber boots require that grease be packed inside the boot to prevent the rubber from interfering with the rod end race.
FIGS strongly suggests MOTO rod ends for daily driven cars due to the shock loads of daily driving as they will handle them better with more support. Precision rod ends are the best mechanical interface and have the best fit, finish and fabric PTFE liner. They can be used on the street of track but may loosen (bearing interface) with high impacts of rough roads.
Contact FIGS for more information or questions.
Note: Specific hardware may change or improve based on design improvements. Pictures are representative of quality.
During installation the inner cam eccentric bolt should be rotated such that the mount is all the way inward, thus maximizing the length of the linkage. By maximizing length, the toe link will provide the least amount of bump steer during travel, which is desirable.
When installing the inner rod end and outer rod end should be clocked 90 degrees with respect to one another. Having the rod ends pinned against the end of their misalignment will cause premature wear and potential failure. The help clock rod ends the rod end can be rotated with an open wrench while the jam nut is held. Note this only works to rotate into tight, if rotated towards loose then the jam nut will come unset. That means LH would be rotated counterclockwise and RH(outer rod ends) would be clockwise relative to the rod end looking into the end of the tube.
Follow the quick install card that is included with the links and shown below and only use dry PTFE lube for lubrication. Refer to our youtube guide on how to lubricate rod ends. Never grip the top nut of the taper stud assembly as this is a fixed nut to hold the stack of spacers to the stud. Use an impact driver or taper pressure to allow starting of the retaining nut.
Lexus | SC430 | 2002-2010 | |
Lexus | IS300 | 2001-2005 | |
Lexus | GS430 | 2001-2005 | |
Lexus | GS400 | 1998-2000 | |
Lexus | GS300 | 1998-2005 |
FIGS TRACK SPEC TOE LINKS IS300/G2 GS SC430
- Brand: FIGS Engineering
- Product Code: L1048
- Availability: In Stock
- $365.66
-
$343.61
Available Options
Related Products
FIGS STREET SPEC MEGA ARMS GEN2 GS/SC430
Our Best Race Arm yet.Our 2GS, Aristo, SC430 Rear MEGA ARM LCA was one of the first suspension produ..
$766.24
SUPRA TT CALIPER BRAKE ADAPTERS V6 IS300 X-CHASSIS JZX90 JZX100 JZX110
As seen on my.is. These Caliper adapters press into Supra TT 4-piston front calipers to adapt them..
$159.86
BC RACING BR SERIES COILOVERS WITH SWIFT OPTION(RATE-BASED SELECTION)
At the '08 SEMA show we were looking for a coilover company willing to offer a solution for the Lexu..
$1,195.00 $1,245.00
KW VARIANT 3 PERFORMANCE COILOVERS IS300
KW Has been making suspensions for competition vehicles since 1995 and they continue to break new gr..
$2,839.00
IS300/GEN2 GS/SC430 REAR SWAY ENDLINKS
REAR SWAY BAR ENDLINKS Version: 2.0 - upgraded rod ends and press in stud on mount end. ROD..
$164.27 $175.30
GEN2 GS SC430 FRONT SWAY ENDLINKS
These high-quality endlinks are designed specifically for the front suspension of the second-generat..
$192.94
BC RACING BR SERIES COILOVERS ALL VEHICLE APPLICATIONS
THIS IS OUR UNIVERSAL APPLICATION ORDER SHEET FOR ALL BC BR SERIES COILOVERS.FOR ORDERING PLEASE WRI..
$1,195.00 $1,245.00
BC RACING BR SERIES COILOVERS FR-S BRZ SCION SUBARU
BC Racing steps up on the FR-S Platform to deliver a great kit at a great price. Technical Spe..
$1,195.00 $1,245.00
BC RACING BR SERIES COILOVERS (FIGS ASSISTED RATE SELECTION)
Get the assistance you need when selecting spring rates. We've learned there's not a one size fits a..
$1,245.00
FIGS MEGA VIP KIT GEN2 GS 300/400 SC430
We had been modifying our arms for some VIP customers for the past 6 years. With all the..
$1,190.70
SPC FRONT ADJUSTABLE UPPER CONTROL ARMS GEN2 GS/SC430
Specialty Products stepped up and changed their design, we couldn't be happier. From the old "co..
$619.96 $842.34
SWIFT SPRING COILOVER UPGRADE
Swift makes a second to none spring and FIGS is pleased to offer a specific upgrade option to any co..
$198.00
URETHANE BUMP STOP (JOUNCE) SPACERS
Dial in your up-travel stops on coil-over suspensions. These easy-to-use Jounce Bumper Spacers allow..
$18.00
FIGS VIP IS300 UCA
Font upper arms that pull in the top and place the ball joint as close to the airbag as possible. Th..
$826.88
STEERING KNUCKLE RCA HYSTEER II : DRIFT SPEC IS300, IS200 JZX90/100/110
As the sport of drifting emerged in the mid 2000's, is300 owners where looking for a steering soluti..
$496.13
STEERING KNUCKLE RCA HYSTEER II : ROAD RACE SPEC IS300, IS200 JZX90/100/110
In the MId 2000's we introduced the RCA Hysteer that took 1 turn out of the lock to lock and increas..
$496.13
FIGS VIP FRONT UCA GS300 GS400 GS430 SC430
These Front Upper arms pull in the top and place the ball joint as close to the airbag/shock as poss..
$744.19
IS300 FIGS FRONT SWAY RELOCATION BRACKET V2
FRONT SWAY BAR RELOCATION BRACKET All sway bars to do fit perfectly especially on lowered vehicles..
$159.86
FIGS FRONT RACE-SPEC ADJUSTABLE UPPER CONTROL ARMS G1 G2 GS/SC430
Looking for more front grip at the track? Looking for adjustment and clearance not offe..
$986.74
FIGS RWD VIP IS UCA
Front upper arms that pull in the top and place the ball joint as close to the airbag as possible. T..
$826.88
FIGS IS250/350 IS-F PERFORMANCE REAR 19MM SPORT SWAY BAR SET
These are discontinued and no longer available, but we are evaluating remaking or redesigning these ..
$220.50 $275.63
JZX90/100 TRAC LINK KNUCKLE BEARING
This is the rear knuckle bearing replacement for the JZX90/100 where the traction link mounts in the..
$192.94
JZX90/100 REAR LCA KNUCKLE BEARING
The is the rear knuckle bearing replacement for the JZX90/100 where the lower control arm mounts in ..
$203.96
JZX90/100 REAR LOWER MEGA LINKS
We developed our rear links to stand up to competition abuse in the top competitive drift circuits a..
$413.44
JZX90/100 COMPLETE MEGA REAR LINK KIT
We developed our complete rear link kit to stand up to competition abuse in the top competitive drif..
$937.13 $992.25
FIGS IS300 JZX110 MEGA REAR GRIP KIT
You have the power! Now let's keep it under control. We are excited to bring you everything you need..
$3,531.29 $3,923.65
FIGS IS300 NATIONAL CHAMPIONSHIP KIT
Get your IS300 track ready with this complete track kit. This is everything Nik Romano ran on his IS..
$6,076.98 $7,596.23
FIGS MEGA REFRESH KIT GEN2 GS/SC430
A total vehicle package for our customers that want the best value. This kit our refresh kit w..
$2,168.07 $2,374.66
FIGS IS300/GS300/GS400/GS430 TOE LOCKOUT PLATES
One of the unfortunate things about the rear toe adjustments on an IS300 is that they are one misste..
$41.90 $50.72
FIGS MEGA REFRESH KIT MKIV SUPRA
A total vehicle package for our customers that want the best value. This kit our refresh kit w..
$2,022.37 $2,255.00
MKIV SUPRA MEGA STREET SPEC REAR LINK KIT
FIGS MEGA REAR LCA1018 11ga Steel construction.Serviceable massive 7/8" outer bearing/ball joint is ..
$1,562.80 $1,736.44
SC300 SC400 GEN1 GS STREET SPEC MEGA REAR LINK KIT
TECH DATAFIGS MEGA REAR LCA1018 11ga Steel construction.Serviceable massive 7/8" outer bearing/ball ..
$1,463.57 $1,626.19
STEERING KNUCKLE RCA HYSTEER II : ROAD RACE SPEC GS SC430
In the MId 2000's we introduced the RCA Hysteer that took 1 turn out of the lock to lock and increas..
$496.13
STEERING KNUCKLE RCA HYSTEER II : DRIFT SPEC 2GS/SC430
As the sport of drifting emerged in the mid 2000's, 2GS and SC430 owners where looking for a steerin..
$716.63
FIGS TRACK SPEC MEGA ARMS GEN2 GS/SC430
Our Best Race Arm yet.Our 2GS, Aristo, SC430 Rear MEGA ARM LCA was one of the first suspension produ..
$881.74
FIGS TRACK SPEC MEGA ARMS IS300
Our Best Race Arm yet.Our IS300 Rear MEGA ARM LCA was one of the first suspension products we create..
$832.13
FIGS MEGA VIP KIT IS300
We had been modifying our arms for some VIP customers for the past 6 years. With all the..
$1,190.70
BC RACING SWIFT SPRINGS
Swift makes a second to none spring and FIGS is pleased to offer BC Racing branded Swift springs to ..
$170.00
FIGS STREET SPEC MEGA ARMS IS300
Constant Innovation and UpgradesOur IS300 Rear MEGA ARM LCA was one of the first suspension products..
$821.63
FIGS STREET SPEC MEGA ARM ESSENTIAL KIT FOR LOWERING IS300 JZX110
Making Lowering Simple, but more than a "camber kit"The impact of lowering an IS300. camber, toe and..
$1,050.00 $1,201.94
FIGS MEGA REFRESH KIT IS300
A total vehicle package for our customers that want the best value. This kit our refresh kit w..
$2,362.50 $2,669.10
Tags: toe, links, rear, is300, is200, altezza, gs300, gs400, sc430, rear, inner tire wear, jzx110, track, spec