Ask Question

These Front Upper arms pull in the top and place the ball joint as close to the airbag/shock as possible. Designed to require minimal chassis fin modification, or none at all depending on adjustment. These arms allow up to -10 degrees of negative camber and around -4.5 as a min.

Features

Steel plate construction with specific gusseting for structure and clearance.
Inner 3-p carbon steel rod end for static offset adjustment. Dial in airbag clearance with this adjustment, (dismount require).
Sliding ball joint carrier for outer fine camber adjustment without arm removal.
3-piece precision bearing ball joint and Chromoly steel taper stud. Locking washers and bolts for ball joint adjustment.
MIG welded
Standard FIGS powder coat included.
SUS 303 spacers for inner mount.

Install:

remove factory arm and ball joint.
Install new FIGS arm onto 2 body mounts, cycle arm without connecting to spindle to check for clearance. Trim as required.
Adjust rod ends such that arm clears coilover or airbag.at droop and fulled compressed
Install ball joint into the spindle and tighten to factory specifications.
Adjust sliding ball joint carrier to desired settings and secure 3 M8 bolts with 20ft-lbs of torque. Ensure serrated locking washers are installed.

Due to the extreme nature of VIP suspension components it is strongly suggested to have components professionally installed and adjusted. All liability related to use will fall on the end customer, parts are provided for show vehicle use. On-road driving at owner' risk.

Lexus	SC430	2002-2010
Lexus	GS430	2001-2005
Lexus	GS400	1998-2000
Lexus	GS300	1998-2005

FIGS VIP FRONT UCA GS300 GS400 GS430 SC430

Brand: FIGS Engineering
Product Code: L1176
Availability: 2-4 WEEKS BUILD

$744.19

Qty

0 reviews / Write a review

Your Name
Your Email
Your Question	Notify me by email if this question is answered
Question Details
	Note: HTML is not translated!
Verification Code
Attachment

Ask Question