Ask Question
As seen on my.is.
These Caliper adapters press into Supra TT 4-piston front calipers to adapt
them to the IS300. These are a press fit part, meaning a shop press or Heavy
ball joint service C-clamp is required for installation.
These will also work
for LS400 caliper although the alignment is not as simple. The Ls400 caliper
lacks the flat mounts and so it must be test fit with the adapters part way
installed and using a long bolt. When located via this method, they can be
pressed in after they are aligned. The LS400 also requires an RCA spacer to
offset the steering linkage and create clearance. We offer a separate kit that
includes RCA spacers and hardware.
Features:
-SUS 303 precision
machined thread adapters with tapered knurling.
-V6 now has a
relaxed tolerance and requires using Loctite 620 retaining compound for use on
aftermarket "replica" calipers. The adapter will seat at the
very base of the hole opening but due to a huge variance in reman calipers.
Small vials of
retaining compound are included with the kit. Retaining compound
cures in the absence of oxygen and should be applied to knurl area prior to
press fit. Adapters press in as below with the widest pattern possible,
fat side inward. Toyota "Sumitomo" badged calipers still press-fit so
if that is what you have retaining compound should not be required. Our complete
LS400 complete retrofit kit is available here.
NOTE: These are offered as a single part only. Swapping these calipers requires Supra TT rotors, dust shield trim or removal, and wheel spacers if used on the factory 17" wheels(and most other wheels as well). If you are looking for a kit that will function better and not require spacers than please look at either our OE-+1 kit or the lightweight aluminum caliper upgrade using the same rotors. We offer this adapter kit with little support as we feel there are much better options available at this time.
Lexus | IS300 | 2001-2005 |
SUPRA TT CALIPER BRAKE ADAPTERS V6 IS300 X-CHASSIS JZX90 JZX100 JZX110
- Brand: FIGS Engineering
- Product Code: GA208SET
- Availability: In Stock
-
$159.86
Related Products
SOLID STEERING RACK BUSHINGS V2 IS300 JZX90 JZX100 JZX110
SOLID STEERING RACK BUSHINGS V2 IS300 JZX90 JZX100 JZX110V2 Solid Rack Bushings are here.We took som..
$103.64
FIGS TRACK SPEC TOE LINKS IS300/G2 GS SC430
Why: The stock rear toe links on the IS300/Gen2 GS/ SC430, JZX110 Chassis are a significant cause of..
$343.61 $365.66
FIGS/RACINGBRAKE IS300 OEM +1 BBK BRACKETS FOR TT DISCS 12.7
CURRENTLY DISCONTINUEDWhen we saw that the market was asking for a BBK but the majority of enthusias..
$340.00
BC RACING BR-SERIES COILOVER LEXUS IS300 1999-2005
BR Series Coilover Lexus IS 200 1999-2005, Coilover Kits|BR Series Single Adjustable Coilovers|Lexus..
$1,195.00 $1,245.00
FIGS STREET SPEC TOE LINKS JZX 90/100
Why: The stock rear toe links on the JZX 90/100 Chassis are a significant cause of inner tire wear a..
$292.16
FIGS MEGA ARM ESSENTIAL KIT FOR LOWERING 2GS SC430
Making Lowering Simple, but more than a "camber kit" The impact of lowering a 2GS/SC is dra..
$972.41 $1,080.45
BC RACING RM-SERIES COILOVER TOYOTA MR2 AW11 87-89
BR Series Coilover Toyota MR2 , Coilover Kits|RM Series Single Adjustable Coilovers|Toyota|MR2 (1987..
$1,495.00 $1,545.00
BC RACING RM-SERIES COILOVER TOYOTA MR2
BR Series Coilover Toyota MR2 , Coilover Kits|RM Series Single Adjustable Coilovers|Toyota|MR2 (2000..
$1,495.00 $1,545.00
330MM 2-PIECE ROTOR FRONT BBK IS300 JZX ALTEZZA
NO MODS REQUIREDFITS UNDER FACTORY 17" WHEELSWORKS GREAT WITH FACTORY MASTER CYLINDERSUPER LIGHT!NEW..
$2,385.00
FIGS STREET SPEC TOE LINKS IS300/G2 GS SC430
Why: The stock rear toe links on the IS300/Gen2 GS/ SC430, JZX110 Chassis are a significant cause of..
$292.16
FIGS STREET SPEC MEGA ARM ESSENTIAL KIT FOR LOWERING IS300 JZX110
Making Lowering Simple, but more than a "camber kit"The impact of lowering an IS300. camber, toe and..
$1,050.00 $1,201.94
Tags: tt, adapters, supra, calipers, 12.7, 323mm, brake, upgrade, jzx100, jzx90, jzx110, is300, altezza, jce10, sxe10, gxe10, front, jzx,