Ask Question
To complement our adjustable front LCA, we have developed an upper control arm for the front to suit those track junkies out there or those just looking to safely add some negative camber. Intended for extra grip, our "Track-Spec" is 100% TIG welded, has an oversized outer bearing cup and adjustable inner rod end mounts.
Before ordering please forward any setup questions or concerns to FIGS customer service so that we can make sure these are the right fit for your desired use case. Extreme lowering, Airbag and cup kits, as well as extreme negative camber may require specific product changes and this is much easier to apply changes to our base product before they are manufactured. Thanks for understanding.
Features:
- +/- 1.5 degrees of camber adjustment centered on -2.5 degree off stock length. MORE NEGATIVE CAMBER ONLY
- +/- 2 degrees of caster centered on +0.5 degrees from stock. MORE CASTER
- USA FK High-strength Precision Rod ends or FIGS 3-p carbon steel rod ends on inner mount. Precision rod ends feature PTFE liners for long life.
- Monolithic machined 4140 Chromoly taper stud for highest shear strength. Rolled threads for easy install and torque and extra structural integrity. Made specifically to match the taper of the OE spindle.
- FK USA Spherical Precision monoball outer joint for idea chock clearance profile and strength.
- Installs using factory hardware and new M14 lock nut is provided for outer.
- Boxed 11ga steel construction for favorable strength to weight ratio. 100% TIG welded and made for track duty.
- Standard FIGS Orange Powdercoat finish. Grey finish optional
Installation
- Requires ball joint separator to remove the outer ball joint from the factory spindle. Remove castle nut and outer ball joint.
- Remove inner cross bolt that mounts through the factory bushings. 19mm socket and wrench.
- Install the ball joint into the spindle first since all adjustment takes place on the inboard side. In order to torque the locknut the taper must be seated into the spin to prevent the stud from turning. The locknut on the TOP of the rod end should not be tampered with as it is there to hold the rod end onto the stud itself. An impact wrench works well to thread the lower locknut until the taper has fully engaged. Then apply final torque of 100-ft-lbs to the locknut.
- Install new arm at the inner mounts with a general measure relative to the factory arm. We suggest equal exposed threads on both rod ends for an even caster profile and around -3 degrees of negative camber. Adjust as needed to get the front end symmetrical, to create balance on both sides. Fine tuning will be done with the lower arm eccentric bolts. Torque to factory specs.
- Caster/camber offset: Camber adjustment is done with both inner mounts adjusted at once equally. Caster is adjusted with one mount threaded in and the other mount out. We suggest always counting threads on both sides to assume symmetric adjustment. NOTE: do not expose more than 3/4" of thread beyond the jam nut on the rod end to maintain max rated strength. The lower arm will have the fine adjustment for camber, the upper arm is just intended to offer an offset to account for suspension changes or wheel fitment.
- Reinstall other components as required.
- Match the number of exposed threads on the opposite side upper arm to achieve balance in both sides of the suspension.
Toyota | Supra | 1993-1998 | |
Lexus | SC400 | 1992-2000 | |
Lexus | SC300 | 1992-2000 |
FIGS TRACK SPEC FRONT UCA MKIV SUPRA SC300 SC400
- Brand: FIGS Engineering
- Product Code: L1278
- Availability: 2-4 WEEKS BUILD
-
$937.13
Available Options
Related Products
SC / SUPRA / FRONT LOWER CONTROL ARM REAR POLYURETHANE BUSHING KIT 54.8MM
These bushings replace the staked rubber bushings on the Front Lower Control arms, rear mount of the..
$84.99 $94.43
SC/ SUPRA / FRONT UPPER CONTROL ARM POLYURETHANE BUSHING 38MM
These bushings replace the staked rubber bushings on the Front Upper Control arms of the SC300/400, ..
$129.99 $144.43
SUPRA POLYURETHANE STEERING RACK BUSHINGS 47MM DIA RACK
Add some positive feedback to your steering with this complete cast poly bushing set. Replaces..
$46.99 $52.21
GEN 1 GS300 JZS147 LS400 UCF10 UCF11 SC300/400 REAR TRAILING ARM (TRAC LINK) POLY BUSHINGS
This is the Rear Trailing Arm bushing that presses into the front of the link, the side that b..
$57.99 $64.43
SUBFRAME REAR MOUNT SUPPLEMENTAL BUSHINGS MKIV SUPRA, GEN 1 GS300 JZS147, SC300/400
These bushings are supplemental bushings, meaning they surround existing OEM crossmember/subframe bu..
$69.99 $77.77
GEN1 GS300 JZS147 SC300 SC400 SUPRA REAR TRACTION LINK KNUCKLE MOUNT POLYURETHANE BUSHING
These bushings replace the staked rubber bushings on the knuckle-side mount of the rear traction lin..
$79.99 $88.88
REAR SUBFRAME FRONT MOUNT SUPPLEMENTAL BUSHINGS (CROSS-MEMBER ) MKIV SUPRA GEN 1 GS300 JZS147, SC300/400
These bushings are supplemental bushings, meaning they surround existing OEM crossmember bushings, f..
$31.99 $35.54
REAR SHOCK MOUNT BUSHINGS MKIV SUPRA GEN 1 GS300 JZS147, SC300/400
These bushings for the rear shock mounts on the JZA80 Supra, SC300/400 and Gen1 GS300. Presses..
$74.99 $83.32
SC / SUPRA / FRONT LOWER CONTROL ARM FRONT POLYURETHANE BUSHING KIT 49.5MM
These bushings replace the staked rubber bushings on the Front Lower Control arm on the front mount ..
$77.99 $86.66
SC300/400 SUPRA FRONT LOWER CONTROL ARM FRONT POLYURETHANE BUSHING KIT 46MM
These bushings replace the staked rubber bushings on the Front Lower Control arm on the front mount ..
$59.99 $66.66
SC300/400 SUPRA / FRONT LOWER CONTROL ARM REAR POLYURETHANE BUSHING KIT 52MM WITH OE CUP
These bushings replace the staked rubber bushings on the Front Lower Control arms, rear mount of the..
$69.99 $77.77
SC300/400 GEN1 GS300 JZS147 SUPRA REAR LCA INNER MOUNT POLYURETHANE BUSHING
These bushings replace the staked rubber bushings on the inside mount of the rear lower control arm...
$89.99 $99.99
GEN1 GS SC300/400 MK 4 SUPRA REAR UPPER CONTROL ARM POLYURETHANE BUSHINGS
These bushings replace the staked rear inner rubber bushings on the upper control arm with..
$116.99 $129.99
GEN 2 GS GS300/400/430 SC430 SOLID STEERING RACK BUSHINGS
Driver Side The first of a series of solid bushing kits, these aluminum bushings press fit into the..
$82.69 $132.30
MKIV SUPRA OE REAR DIFF COMPLETE MOUNT KIT
This is a complete rear differential mount kit for OE MKIV SUPRA vehicles. The pinion mounts a..
$332.98 $386.45
OE REAR DIFFERENTIAL MOUNT BUSHING KIT 2IS, GS, LS, SC, SUPRA, RC
BETTER THAN SOLID-Just as much support without the gear shock!If you are looking for a rear diff kit..
$332.98 $355.86
SC300/400 MASTER BUSHING KIT
We are pleased to finally offer a complete master kit for the SC300/400 MKIVSupra.A picture of the r..
$1,745.47 $1,827.61
FIGS FRONT LOWER OE REPLACEMENT/ ADJUSTABLE MEGA ARM LCA MKIV SUPRA SC300 SC400
There has always been a problem with the front LCA on the Toyota MKIV Supra and Lexus SC, the ball j..
$1,642.73
FIGS TRACK SPEC TRAC LINKS SC300 SC400 MKIV SUPRA SOARER INOX
We are pleased to offer our high quality trac links for the MKIV Supra and Lexus SC 300/400 Trac Li..
$422.89 $444.94
MKIV SUPRA REAR TOE LINK INNER MOUNT POLYURETHANE BUSHING
These bushings replace the staked rubber bushings on the inner mount of the rear toe control linkage..
$89.99 $99.99
SC300 SC400 SOLID STEERING RACK BUSHINGS
We finally did it, SC solid steering rack bushings for the driver's side post mounts.Easy to i..
$76.07
FIGS REAR UPPER CONTROL ARM MKIV SUPRA SC 300/400 GS300
To complement our other link and arm offerings, we now round out the set with rear adjustable upper ..
$1,085.96
GEN1 IS300 REAR DIFF PINION MOUNT MODULAR PERFORMANCE POLYURETHANE BUSHING
These bushings replace the rubber pinion mount for the rear with a modular bushing consisting of 3 s..
$108.00 $127.06
PENSKE MKIV SUPRA 2-WAY TRACK COILOVERS
The MKIV Supra really shines when fit with a proper suspension. Built for Global Time Attack, ..
$4,950.00 $5,200.00
REAR DIFF PINION MOUNT MODULAR PERFORMANCE POLYURETHANE BUSHING
These bushings replace the rubber pinion mount for the rear with a modular bushing consisting of 2 s..
$89.99 $99.99
2GS/SC430 ADJUSTABLE MASTER BUSHING KIT
We are pleased to finally offer a complete master kit for the Gen 2 GS and SC430 with adjustable bus..
$1,350.00 $1,608.74
MKIV SUPRA HIGH HP REAR DIFF COMPLETE MOUNT KIT
This is a complete rear differential mount kit for higher HP MKIV SUPRA vehicles. The pinion m..
$362.98 $392.22
PERFORMANCE REAR DIFFERENTIAL MOUNT BUSHING KIT 2IS, GS, LS, SC, SUPRA, RC
BETTER THAN SOLID-Just as much support without the gear shock!If you are looking for a rear diff kit..
$362.98 $386.45
MKIV SUPRA MASTER BUSHING KIT
We are pleased to finally offer a complete master kit for the SC300/400 MKIVSupra.A picture of the r..
$1,757.47 $1,862.91
LS400 UCF10 REAR TRAILING ARM (TRAC LINK) REAR LOCATION POLY BUSHINGS
This is the Rear Trailing Arm bushing that presses into the rear of the link, the side that bo..
$48.29 $53.66
FIGS STREET SPEC TRAC LINKS SC300 SC400 MKIV SUPRA SOARER INOX
We are pleased to offer our high quality street spec trac links for the MKIV Supra and Lexus SC 300/..
$281.14 $303.19
Tags: SC300, SC400, SC, MKIV, MKIV SUPRA, SUPRA, ARMS, UPPER, FRONT, UPPERS, ARMs, ADJUSTABLE, TRACK, RACE, race, high, hp, spherical, soarer, uca, front uca, mega, FUCA, control, SPEC