Ask Question
As seen on my.is.
These Caliper adapters press into Supra TT 4-piston front calipers to adapt
them to the IS300. These are a press fit part, meaning a shop press or Heavy
ball joint service C-clamp is required for installation.
These will also work
for LS400 caliper although the alignment is not as simple. The Ls400 caliper
lacks the flat mounts and so it must be test fit with the adapters part way
installed and using a long bolt. When located via this method, they can be
pressed in after they are aligned. The LS400 also requires an RCA spacer to
offset the steering linkage and create clearance. We offer a separate kit that
includes RCA spacers and hardware.
Features:
-SUS 303 precision
machined thread adapters with tapered knurling.
-V6 now has a
relaxed tolerance and requires using Loctite 620 retaining compound for use on
aftermarket "replica" calipers. The adapter will seat at the
very base of the hole opening but due to a huge variance in reman calipers.
Small vials of
retaining compound are included with the kit. Retaining compound
cures in the absence of oxygen and should be applied to knurl area prior to
press fit. Adapters press in as below with the widest pattern possible,
fat side inward. Toyota "Sumitomo" badged calipers still press-fit so
if that is what you have retaining compound should not be required. Our complete
LS400 complete retrofit kit is available here.
NOTE: These are offered as a single part only. Swapping these calipers requires Supra TT rotors, dust shield trim or removal, and wheel spacers if used on the factory 17" wheels(and most other wheels as well). If you are looking for a kit that will function better and not require spacers than please look at either our OE-+1 kit or the lightweight aluminum caliper upgrade using the same rotors. We offer this adapter kit with little support as we feel there are much better options available at this time.
Lexus | IS300 | 2001-2005 |
SUPRA TT CALIPER BRAKE ADAPTERS V6 IS300 X-CHASSIS JZX90 JZX100 JZX110
- Brand: FIGS Engineering
- Product Code: GA208SET
- Availability: In Stock
-
$159.86
Related Products
Tags: tt, adapters, supra, calipers, 12.7, 323mm, brake, upgrade, jzx100, jzx90, jzx110, is300, altezza, jce10, sxe10, gxe10, front, jzx,