Designed to require minimal chassis fin modification, these arms are able correct several degrees of camber. 

Features

• Steel plate construction with specific gussets for structure and clearance.
• TIG welded
• Standard FIGS powder coat included.
• SuperPro Adjustable Poly Bushings with Lifetime Warranty
• Static Ball Joint Offset to Correct Camber for Lowered Vehicles

Install:

• remove factory arm and ball joint.
• Install new FIGS arm onto 2 body mounts, cycle arm without connecting to spindle to check for clearance.  If there is body fin contact on extremely lowered vehicles, trim as required. This should not be necessary with most installations.  
• Adjust eccentric on bushings by setting bolt torque and rotating arm, then loosening bolt.  Note the center tube will rotate when bolt is loose for adjustment and lock into place once tightened.
• Install ball joint into the spindle and tighten to factory specifications.
• Adjust eccentric bushing to gain offset in camber, for correction only.
• This arm will not create more negative camber