Add some positive feedback to your steering with this complete cast poly bushing set.  Replaces both the donut bushings and the clamshell bushing.  

Includes grease.

Install:

Old bushings will be tricky to get out on the driver's side, remove the 4 bolts that retain the steering rack.

 Pull back the steering rack and use a long bolt, a washer and a socket to remove the old ones or you can optionally cut the out lip of the stock bushing so it can pass easily.

The clamshell bushing is much easier and will fall right off once the clamp is removed.

Lube new poly bushing and press in first, fill voids and coat the lead in transition. The bushings are in 2 halfs so one per side. 

Press in cylinder shaft second.

You done!

Fits SC300/400 and Lexus GS with 50mm diameter on  clamshell grommet