The lower mounts in the STANCE coilovers are known for rapid wear and deterioration leaving your suspension clunking and knocking.  For years we have made custom spherical bearing inserts for customers and decided a lifetime Polyurethane bushing from SuperPro was the best long term solution.  Made from their proprietary blend of long-lasting material, we can offer a lifetime warranty with exclusions on use.  Bushings are 38mm OD, common to many other coilovers and designed for the IS300.  We can adapt them to other applications if you can provide measurements. The Diamond perf pattern inside the bushing retains grease for a long time, so even greasing will be infrequent.

Bushing dimensions:

Front Bushings     OD: 38mm    ID: 12mm    Length: 40mm   

Rear Bushings    OD: 38mm    ID: 14mm    Length: 55mm

The installation:

-The install procedure is fairly easy as most of the work should be done for you on an old bushing, just press out othe outer cup.  

-Press these new bushings in with a shop press or ball joint service tool using a 1.37" or 35mm ID press cup, socket or anything else that presents a nice flush face to clear the poly material and contact the outer cup directly.

-Press in until flush and then insert the center tube with a small amount of grease on the leading edge.