Ask Question

To complement our other link and arm offerings, the IS-F product category gets a new adjustable upper arm (FUCA) We have built these arms to handle track abuses as they were commissioned for a Nurburgring track IS-F.   With lifetime poly bushing or spherical inner bearing options and high-misalignment outer spherical ball joint, these have all the necessary components to handle the extreme conditions of track use.  The setup is light, easy to adjust without an alignment rack and allows a perfect balanced offset for wheel/tire fitment of camber curve modification.  The IS-F has a tight arm pocket that it travels up into so we had to come up with a unique design.  We leveraged our past 4 years of PROAngle testing and competition on the JZX90 platform and created a similar design for the F that is fully-boxed, TIG welded, and has a compound camber/caster adjustment via the outer rod end.  An additional adjustment is made with optional inner SuperPro Poly bushings.


PLEASE NOTE, THESE ARE NOT INTENDED TO MOUNT ON VEHICLES WITH FACTORY DIAMETER SPRINGS.

 

Features:

  • Boxed Steel plate construction for max strength.
  • 100% Precision TIG welded.
  • Setup for mild front camber offset for traction (road race) or positive camber for more contact patch for straight-line grip (drag/drift). Max range is -4.5 to -1.5(with grade 8 jam nut)
  • SuperPro Lifetime Poly bushings for inner mounts or custom Precision FK PTFE Spherical Bearings(20% restocking fee if canceled after 24hrs on the bearing version).
  • Outer ball joint replaced with Precision High-Misalignment PTFE Rod end and monolithic Chromoly taper stud.
  • Outer ball joint set with Belleville washer on the jam nut for additional security.
  • Never tamper with the outer ball joint assembly as it is retained with several adhesives for safety.

 

Adjustment

Our front upper arms are symmetrically adjusted meaning you adjust both sides by the same amount via the rod end threads.  Though it may appear inconvenient, the upper arms should be adjusted as a fixed offset.  Infinite turnbuckle adjustments can create differences from side to side impacting handling and steering bias. Since the lower arms are fixed as well and the subframe is aluminum, the static offset should general asymmetric camber curve on both corners.   Alignments are always iterative, meaning as adjustments are made to one link, the other will need small adjustments as well.  By fixing the front upper to a finite offset in graduations of 1/16" we are simplifying to overall alignment process and also making it easy to adjust to a predetermined setting instead of a measured setting.

 

Primary adjustment is done with the wheel off as a static offset.  Start with a deterministic number of turns on the upper rod end from fully seated.  This means thread it in completely, then spin it out the same number of turns per side.  The max strength of the rod end will de-rate after 10 turns outward or 0.625" of exposed thread beyond the jam nut.  We strongly suggest keeping the max thread engagement possible to maximize safety. If using these arms for positive camber correction we will include a grade 8 jam nut to provide additional support. Each turn (full rotation of the rod end) will net close to .8 degrees of camber change.

 

Options

We build these with several options for customization and user input. If one of our options does not meet your vehicle goals contact us about custom options. Camber goals are a starting point but given the specialized nature of wheel fitment and body work, we ask for a center point on the arm length for custom setups and we will also provide a length offset number for our standard configurations.  We have complete suspension maps and can offer setup advice on adjustment and general ranges for fitment.

 

SuperPro Poly Inner Mounts: The best for long life and low maintenance.  Lifetime poly features grooves to hold grease and a break-through material that is unlike any other Polyurethane on the market.  Guaranteed to not egg out, deform or migrate, this is the best Polyurethane we could find and we have looked all over the world. An added benefit of our design is that we use factory bushing dimensions.  This allows us to reuse SuperPro bushings that were previously purchased and perhaps installed in the factory UCA.  At this time we have only confirmed OE SuperPro bushings and we do not suggest another brand due to fitment tolerance and potential failure due to improper fit.

  • Centered: The center tube of the bushing is centered and concentric, no adjustment and centered pivot.
  • Adjustable: The center tube is knurled and offset drilled making adjustment possible depending on how they are clocked when the mounting bolt is tightened. Knurls bite into the sheetmetal to hold the center tube in place during normal operation.  These bushings can be adjusted on-vehicle by unbolting the ball joint of the upper arm, rotating the arm with the bolts loose, then tightening the bolt again to hold the center tube.  The tube will rotate around 15-20 degrees per swing to adjust clock.  Generally, we suggest using this as range offset for your desired settings, meaning full in or full out to reduce ambiguity.

 

Spherical Bearing Mounts:  The most precise, free-moving motion transfer connection, these bearings are a must for higher loads and stresses from aggressive wheel fitments. The bearings can produce low-speed squeaking related to the tight interface and PTFE fabric but PTFE dry lube worked into the interface should resolve the noise.


Application: 

    IS F             2008-2014

    IS350         2006-2021

    IS300         2016-2020

    IS250         2006-2015

    IS200t        2016


Safety and Maintenance

Like all of our products, these are arm provided for customers to use AT YOUR OWN RISK.  Proper setup, alignment, and installation should be done with reasonable and prudent judgment and any concern should be raised immediately.  Arms should always be inspected within 100 miles of original installation and inspection of jam nuts and mounting bolts should be verified to be fastened securely.  Rod ends should be centered on their mount to minimize bias and maximize misalignment. Rod ends should only be lubricated with PTFE dry lube and never grease.  Rubber boots are available however frequent internal lubrication is required again with a PTFE dry lube.

Lexus IS350 2006-2022
Lexus IS300 2018-2022
Lexus IS250 2006-2015
Lexus IS200t 2016-2017
Lexus IS F 2008-2014
Lexus GS460 2008-2011
Lexus GS450h 2007-2011
Lexus GS430 2006-2007
Lexus GS300 2006-2006

Write a review

Please login or register to review

LEXUS IS GS TRACK SPEC FRONT UPPER CONTROL ARM

  • $937.13
  • $909.56


Available Options


Related Products

FIGS STREET SPEC MEGA ARMS GEN 2 IS / IS-F  V2

FIGS STREET SPEC MEGA ARMS GEN 2 IS / IS-F V2

TECH DATA CNC machined 1018 steel end fittings. Formed steel construction. Flat sections dimp..

$964.69

FIGS STREET SPEC TOE LINKS G2 IS/ G3 GS IS-F ISX50 GS350 GS460

FIGS STREET SPEC TOE LINKS G2 IS/ G3 GS IS-F ISX50 GS350 GS460

  The stock toe links on the ISX50 and Gen 3 GS are a significant cause of inner tire we..

$292.16

FIGS STREET SPEC TRAC LINKS GEN2 IS/ GEN3 GS IS-F ISX50 GS350 GS460 INOX

FIGS STREET SPEC TRAC LINKS GEN2 IS/ GEN3 GS IS-F ISX50 GS350 GS460 INOX

The stock TRAC (or traction) links on the ISX50 and Gen 3 GS are fairly stout but they do have sever..

$369.34

A BEST SELLER!!
PREORDER
FRONT LOWER ARM REAR MOUNT #2 POLYURETHANE BUSHING 90 HIGH PERFORMANCE INSTALLED IN BRACKET

FRONT LOWER ARM REAR MOUNT #2 POLYURETHANE BUSHING 90 HIGH PERFORMANCE INSTALLED IN BRACKET

A BEST SELLER!This is an upgraded version of our standard bushing and features a stiffer 90 duromete..

$360.00

FRONT LCA REAR MOUNT PRECISION BEARING TRACK SPEC V2 2006+ 2IS ISF RC RCF GSF

FRONT LCA REAR MOUNT PRECISION BEARING TRACK SPEC V2 2006+ 2IS ISF RC RCF GSF

First, we refined the Rear LCA mount for the IS RC and GS with a progressive polyurethane mount from..

$501.64

OHLINS ROAD AND TRACK COILOVERS IS-F SPECIFIC

OHLINS ROAD AND TRACK COILOVERS IS-F SPECIFIC

We have been working with OHLINS USA to offer this R and T kit for the 250/350 as well as making the..

$3,981.60

OHLINS TTX ILX COMPETITION COILOVERS IS-F SPECIFIC

OHLINS TTX ILX COMPETITION COILOVERS IS-F SPECIFIC

It started as a customer dream, to own one of the more pervasive shock setups used in motorsports an..

$7,754.25

FIGS OHLINS TRACK SPEC COILOVERS MKIV SUPRA SPECIFIC JZA80

FIGS OHLINS TRACK SPEC COILOVERS MKIV SUPRA SPECIFIC JZA80

We have been working with OHLINS USA to offer this track Spec Coilover kit for the Supra.  ..

$4,650.00

OHLINS TTX ILX COMPETITION COILOVERS RC-F GS-F SPECIFIC

OHLINS TTX ILX COMPETITION COILOVERS RC-F GS-F SPECIFIC

It started as a customer dream, to own one of the more pervasive shock setups used in motorsports an..

$7,754.25

HKS HIPERMAX IV SP COILOVERS MKIV SUPRA SPECIFIC JZA80

HKS HIPERMAX IV SP COILOVERS MKIV SUPRA SPECIFIC JZA80

Single Tube Damper DesignMonotube dampers allow for more accurate and stable control and adjustment ..

$1,841.40

HKS HIPERMAX IV SP COILOVERS LEXUS IS-F

HKS HIPERMAX IV SP COILOVERS LEXUS IS-F

Spring Rates (F/R)(22K / 16K)DescriptionThe sport model to have a comfortable drive even in the wind..

$2,200.00 $2,380.00

HKS HIPERMAX S COILOVERS LEXUS IS-F

HKS HIPERMAX S COILOVERS LEXUS IS-F

Spring Rates (F/R)(16K/10K)Single Tube Damper DesignThe new HIPERMAX S series continue to employing ..

$2,012.00 $2,340.00

OHLINS ROAD AND TRACK COILOVERS GR SUPRA

OHLINS ROAD AND TRACK COILOVERS GR SUPRA

The Öhlins Road & Track suspension gives customers a true racing experience, with their own cars..

$2,990.00

FIGS TRACK SPEC MEGA ARMS GEN 2 IS / IS-F  V2

FIGS TRACK SPEC MEGA ARMS GEN 2 IS / IS-F V2

TECH DATA CNC machined 1018 steel end fittings. Formed steel construction. Flat sections dimp..

$1,080.19

FIGS TRACK SPEC TOE LINKS G2 IS/ G3 GS IS-F ISX50 GS350 GS460

FIGS TRACK SPEC TOE LINKS G2 IS/ G3 GS IS-F ISX50 GS350 GS460

The stock toe links on the ISX50 and Gen 3 GS are a significant cause of inner tire wear. FIGS ..

$365.66

FIGS TRACK SPEC TRAC LINKS GEN2 IS/ GEN3 GS IS-F ISX50 GS350 GS460 INOX

FIGS TRACK SPEC TRAC LINKS GEN2 IS/ GEN3 GS IS-F ISX50 GS350 GS460 INOX

The stock TRAC (or traction) links on the ISX50 and Gen 3 GS are fairly stout but they do have sever..

$398.74 $442.84

OHLINS ROAD AND TRACK FIGS TRACK DEDICATED COILOVERS GR SUPRA

OHLINS ROAD AND TRACK FIGS TRACK DEDICATED COILOVERS GR SUPRA

This is the FIGS TRACK DEDICATED version which means special valving for higher springs rates. ..

$3,490.00

OHLINS EDC DELETE KIT GR SUPRA

OHLINS EDC DELETE KIT GR SUPRA

When installing aftermarket shocks on the GR Supra, the electronically controlled damper catridges a..

$535.00

KW SUSPENSIONS EDC DELETE KIT GR SUPRA

KW SUSPENSIONS EDC DELETE KIT GR SUPRA

Cancellation kits eliminate persistent trouble codes that exist when upgrading a suspension on a veh..

$423.95

Tags: LEXUS, IS-F, FRONT, UPPER, CONTROL, ARM, TRACK SPEC.FUCA, Uca, camber, correction, inner, tire, wear, lowering, control, arms, upper, IS350, IS300, IS250, IS250t, ISF, is-f, track, camber, G1068