ADJUSTABLE SWAY ENDLINK SET (LIMITED RELEASE)

Application GT86 FRS BRZ

We have built a great kit using SuperPro Front Ladder style sway endlinks and our "stubby" rear Precision endlinks. These links allow you to get better performance out of your swaybar and take advantage of the adjustable mount locations without causing bind.  We only built a few so order now before they are gone.

FRONT:

SuperPro Allow tube with booted ball joints.

Length is ideal for lowered cars.

Includes 2 complete assemblies.

REAR:

ROD END TYPE: 3-P FK Rod ends, Teflon lined, Precision series.

Includes 2 complete assemblies.

Length is ideal for lowered cars and the short droop of the 86 platform.  Allows better use of the rear adjustable sway bars offered by SuperPro and others.

FEATURES:

-Allows preload adjustment when lowered or with aftermarket sway bars. Line up mount with bushing mount.  Should be perfectly level when vehicle is loaded.

-Replaces bent or loose factory endlinks from lowered vehicles

INSTALL NOTE:

- Measure the link length to make the sway bar pickup point flat with its bushing (0 preload) when the vehicle is loaded.

-Adjust the linkage to that length and mount, setting the jam nut.

-The 2 nylon washers are intended to be preloaded but do not over-tighten.  We suggest 24ft-lbs or a 1/4 turn past fully mated.