Ask Question

This is an upgraded version of our standard bushing and features a stiffer 90 durometer Poly.  Watch the video to see how they perform under pressure.  These bushings replace the staked factory rubber bushings with Superpro Polyurethane Bushings that are built to last and properly engineering to increase performance.  The high-end polyurethane design eliminates the parasitic spring rate caused by staked bushings and increase service life. These bushings also provide more positive front arm location during spirited driving.  It also will reduce inner tire wear due to toe deflection under braking 

Set includes 2-Bushing sets to replace both bushings

includes grease

a shop press is strongly suggested for ease of install. Its pretty much manditory don't try to do this without one.

 Video of it in action


Install:

The bushing sits at the back of the front LCA which is held on by two bolts into the chassis and one nut that is threaded on to an extension of the arm.

You will need to remove both under-covers and the side bracket bolt that is attached to the #2 bushing bracket.

Remove the two bolts holding the bushing bracket (one with nut) and 2 side rail bracket 

Remove the rear nut that holds the bracket to the LCA.

Remove rear bushing bracket, this may require deflection of the front arm bushing or unbolting the front location to free preload   If too difficult you will need to remove the entire arm, sway bar and shock absorber. Contact FIGS is this is the case.

With a shop press, remove the old bushing.

Press the new bushing into the aluminum bracket.

Install new bushings making sure the bevel on the bushing tube is oriented towards the front of the vehicle.

Reinstall rear nut to hold bushing in place but not to final torque. 

Reinstall 2 bolts plus nut  and 2 bolts of side bracket.   Long bolt through side rail bracket torque to 204Nm/ 150ft-lbs, short bolt with nut 86Nm/63ft-lbs, and the side rail bolts 50Nm/37ft-lbs. Apply final torque to the nut at the center of of the bushing 113Nm/ 83ft-lbs.

Verify clean cycling of the suspension by loading and unloading.  If any other OE or rubber bushings where loosened or replaced, load the suspension and then final torque them to prevent their premature wear. 

You done!

Write a review

Please login or register to review

GEN 3IS 2IS IS-F 3GS FRONT LOWER ARM REAR MOUNT #2 POLYURETHANE BUSHING 90 HIGH PERFORMANCE

  • Brand: SuperPro
  • Product Code: A269
  • Availability: In Stock
  • $222.21
  • $199.99


Related Products

FIGS STREET SPEC MEGA ARMS GEN 2 IS / IS-F  V2

FIGS STREET SPEC MEGA ARMS GEN 2 IS / IS-F V2

TECH DATA CNC machined 1018 steel end fittings. Formed steel construction. Flat sections dimp..

$964.69

SPC MASTER BUSHING INSTALL TOOL KIT

SPC MASTER BUSHING INSTALL TOOL KIT

Includes cups and threads to drive in just about any bushing imaginable.  We found it a great asset ..

$720.00 $1,355.73

3GS 2IS/ISF REAR TRACTION LINK KNUCKLE MOUNT POLYURETHANE BUSHING

3GS 2IS/ISF REAR TRACTION LINK KNUCKLE MOUNT POLYURETHANE BUSHING

These bushings replace the staked rubber bushings on the knuckle-side mount of the rear traction lin..

$111.16

2-PIECE FRONT BRAKE ROTORS 2ND GEN IS / 3RD GEN GS

2-PIECE FRONT BRAKE ROTORS 2ND GEN IS / 3RD GEN GS

FIGS and RacingBrake have co-developed another 2-piece OEM replacement rotor for multiple Lexus vehi..

$1,025.00 $1,100.00

RB 4/2 POT CALIPER KIT (330x30/330x24) GEN2 IS GEN3 GS

RB 4/2 POT CALIPER KIT (330x30/330x24) GEN2 IS GEN3 GS

FIGS and RacingBrake have co-developed another 2-piece OEM replacement rotor for multiple Lexus vehi..

$3,610.00 $4,000.00

RB 2-PIECE ROTOR KIT (380x34/342x28) GSF AND RCF

RB 2-PIECE ROTOR KIT (380x34/342x28) GSF AND RCF

A 2-Piece Rotor Kit for the RC-F or GS-F.Includes front and rear rotors with XT910 pads...

$2,926.00 $3,080.00

4 POT CALIPER 2-PIECE FRONT BRAKE ROTORS 2ND GEN IS / 3RD GEN GS

4 POT CALIPER 2-PIECE FRONT BRAKE ROTORS 2ND GEN IS / 3RD GEN GS

FIGS and RacingBrake have co-developed another 2-piece OEM replacement rotor for multiple Lexus vehi..

$2,080.45 $2,211.00

FIGS TRACK SPEC MEGA ARMS GEN 2 IS / IS-F  V2

FIGS TRACK SPEC MEGA ARMS GEN 2 IS / IS-F V2

TECH DATA CNC machined 1018 steel end fittings. Formed steel construction. Flat sections dimp..

$1,080.19

RB 2-PIECE REPLACEMENT FRONT ROTORS GSF AND RCF

RB 2-PIECE REPLACEMENT FRONT ROTORS GSF AND RCF

Meant for use with the following brake kits.https://shopfigs.com/v5/LX-IRK-02https://shopfigs.com/v5..

$764.42

RB 6/4 POT CALIPER KIT (380x32/360x26) IS500

RB 6/4 POT CALIPER KIT (380x32/360x26) IS500

The IS500 6-piston front and 4-piston rear caliper kit is a high-performance braking system designed..

$6,000.00 $6,479.00

Tags: 48075-30030, is350, is250, isf, rcf, rc350, fsport, ls430, gs450h, gs350, rcf, gsf, RC-F, GS-F, is 350, is 250, is f, rc f, rc 350, f sport, ls 430, gs 450h, gs 350, gs f, IS-F, 3491, 3491-90, spf3491-90k, superpro, only, #2, bushing