• IS300 2GS SC430 TRAC LINK KNUCKLE REAR SPHERICAL BEARING

Ask Question

In the high demand conditions of drift, drag and road racing, the rear trac(tion) linkage takes the majority of the locating load of the rear suspension.  As power is applied, the rear tire climbs against the tension of this linkage and with it causes deflection while grip is applied.  The stock rubber bushing is punished in this harsh environment and we have witnessed first-hand the impact of these forces on the factory bushings, which tear, twist, and bias themselves into destruction and unpredictable alignment.

We are here with a solution, a high precision solid spherical bearing and spacer option to deliver pure traction, unparalleled control and fantastic feedback for all driving conditions.

Location" Rear Knuckle at the forward location where the trac link mounts. 

Set includes 2- toleranced Precision 3-P Bearings clips and stainless High-misalignment spacers to replace BOTH sides.

A bearing service tool (large C clamp) is suggested since the bearing will need ot be centered upon press fit. 

 Optional M14 upgrade to bump up the trac link mount from and m12 bolt.  Includes new bolt hardware.  Only designed to work with FIGS Upgraded M14 clevis mount.

Application:

2001-2005 Lexus IS300

1998-2005 Lexus GS300/400/430

2001-2010 Lexus SC430

2001-2007 JZX110

Install:  

Remove old bearing via any means possible. A heavy bearing service tool is suggested. pushing out the center tube and slitting the outer cup works best.

Press in bearing and stop when the reveal on both sides of the bearing is the same (centered in the kncukle)

*NOTE only press on the outer cup section, never the bearing center. For easier installation freeze the bearing and heat the knuckle slightly with a heat gun or torch.

Install stainless steel misalignment spacers

Inspect to make sure there is no binding in the bearing motion. If low speed stiction is present, lubricate the bearing with a DRY FILM teflon spray.

You done!

 

Lexus SC430 2002-2010
Lexus IS300 2001-2005
Lexus GS430 2001-2005
Lexus GS400 1998-2000
Lexus GS300 1998-2005

Write a review

Please login or register to review

IS300 2GS SC430 TRAC LINK KNUCKLE REAR SPHERICAL BEARING

  • $203.96


Related Products

REAR SUBFRAME FRONT MOUNT SUPPLEMENTAL BUSHINGS (CROSS-MEMBER ) MKIV SUPRA GEN 1 GS300 JZS147, SC300/400

REAR SUBFRAME FRONT MOUNT SUPPLEMENTAL BUSHINGS (CROSS-MEMBER ) MKIV SUPRA GEN 1 GS300 JZS147, SC300/400

These bushings are supplemental bushings, meaning they surround existing OEM crossmember bushings, f..

$31.99 $35.54

SPC MASTER BUSHING INSTALL TOOL KIT

SPC MASTER BUSHING INSTALL TOOL KIT

Includes cups and threads to drive in just about any bushing imaginable.  We found it a great asset ..

$720.00 $1,355.73

A BEST SELLER!!
OE REAR DIFFERENTIAL MOUNT BUSHING KIT 2IS, GS, LS, SC, SUPRA, RC

OE REAR DIFFERENTIAL MOUNT BUSHING KIT 2IS, GS, LS, SC, SUPRA, RC

BETTER THAN SOLID-Just as much support without the gear shock!If you are looking for a rear diff kit..

$332.98 $355.86

GEN2 GS, IS300  REAR SUBFRAME  SUPPLEMENTAL (COLLAR) BUSHINGS

GEN2 GS, IS300 REAR SUBFRAME SUPPLEMENTAL (COLLAR) BUSHINGS

These bushings are supplemental bushings, meaning they surround and support the existing OEM subfram..

$63.98 $71.08

FRONT UCA (UPPER CONTROL ARM) "TRACK SPEC" LEXUS IS300 JZX110

FRONT UCA (UPPER CONTROL ARM) "TRACK SPEC" LEXUS IS300 JZX110

To complement our other link and arm offerings, the IS300/JZX110 product category gets a new adjusta..

$862.31 $889.88

FRONT UCA (UPPER CONTROL ARM) OE REPLACEMENT IS300 JZX110

FRONT UCA (UPPER CONTROL ARM) OE REPLACEMENT IS300 JZX110

When it comes to a front end refresh, the front UCA has always been a challenge to find complete. FI..

$275.63 $385.88

PERFORMANCE REAR DIFFERENTIAL MOUNT BUSHING KIT 2IS, GS, LS, SC, SUPRA, RC

PERFORMANCE REAR DIFFERENTIAL MOUNT BUSHING KIT 2IS, GS, LS, SC, SUPRA, RC

BETTER THAN SOLID-Just as much support without the gear shock!If you are looking for a rear diff kit..

$362.98 $386.45

DIY 2JZ-GE NA-T TURBO MANIFOLD FLANGE 304 STAINLESS LASERCUT

DIY 2JZ-GE NA-T TURBO MANIFOLD FLANGE 304 STAINLESS LASERCUT

What do you need to build your own IS300 Turbo Kit? One of the first things you might do when planni..

$181.91

DIY 2JZ-GE NA-T PORTED TURBO MANIFOLD FLANGE 304 STAINLESS LASERCUT

DIY 2JZ-GE NA-T PORTED TURBO MANIFOLD FLANGE 304 STAINLESS LASERCUT

What do you need to build your own IS300 Turbo Kit? One of the first things you might do when planni..

$270.11

FRONT UCA (UPPER CONTROL ARM) "TRACK SPEC" JZX90 JZX100

FRONT UCA (UPPER CONTROL ARM) "TRACK SPEC" JZX90 JZX100

2 Week Build Time- Built to orderTHESE ARMS ADD NEGATIVE CAMBER To complement our other link an..

$799.31 $826.88

FIGS PERFORMANCE FUCA STATIC AND ADJUSTABLE LEXUS IS300 2001-2005

FIGS PERFORMANCE FUCA STATIC AND ADJUSTABLE LEXUS IS300 2001-2005

When it comes to a front end refresh, the front UCA has always been a challenge to find complete. FI..

$315.00 $420.00

Tags: is300, spherical, trac, link, traction, tension, rear, hub, knuckle, spindle, bushing, race, track, drag, high, hp, jzx110, gs300, gs400, gs430, sc430, gs, lexus, toyota, is300