Ask Question

Why: The stock rear toe links on the MKIV Supra platform are a significant cause of inner tire wear and even worse the inner subframe adjustment mounts can become damaged making an alignment a crap shoot. FIGS has taken a long time to develop an OEM quality solution that allows easy adjustment, long product service life and the most control over the rear toe geometry of any similar product on the market. We maintained the strength of the system with absolutly no weldment at the rod end interface unlike cheaper alternatives offered by import companies. That means a carbon steel or chromoly single peice thread stud integrated with the bearing for maximum strength. Tapered studs are precision machined from 4140 chromoly then heat-treated to maximum strength.   Finally the are zinc-plated to keep them from rusting. FIGS designed our own tapered studs for maximum clearance of the rod end during travel yet close enough to the mount to not incur unecessary additional bumpsteer. Toe Links from FIGS also allow serviceability should the rod end wear and need replacing. These compliment the MEGA arms by providing a balanced rear steering strategy under bump, making them an obvious choice for descriminating race teams and club cars.

FITS

93.5-98 MIKIV Supra

SET = 2 Toe links 1 for each side

Location: Frontside middle of rear suspension. 

Influence: Rear steering under compression

Features:

  • Length adjustment of up to 1.5" without removing from vehicle.
  • Increases the arc length of the rear toe linkage to reduce bump deflection.
  • Infinite fine toe adjustment to overcome stock eccentric mounts that are warn or bent.
  • Precision rod ends provide the strength for Track vehicles.
  • Top quality materials and workmanship mean you are buying the best product on the market compared to low quality competing parts. No welds at the bearing interface, premium bearing options for long service life.

Specs

  • Precision (3-P) Track Duty rod end, PTFE lined.
  • 4140 Chromoly tapered stud assembly is stronger than stock ball joint.
  • SUS303 FIGS rod end spacers for precision chassis mount.
  • Swaged 1" SAE 1012 steel tubing for reduced weight and increased strength. Knurled for grip and yellow zinc or Black Dichromate finish for corrosion resistance.
  • Includes tubing for alignment gripping and coated clamps for ABS sensors.


 Contact FIGS for more information or questions.

Note: Specific hardware may change or improve based on design improvements. Pictures are representative of quality.

During installation the inner cam eccentric bolt should be rotated such that the mount is all the way inward, thus maximizing the length of the linkage. By maximizing length, the toe link will provide the least amount of bumpsteer during travel, which is desirable.

When installed the inner rod end and outer rod end should be clocked 90 degrees with respect to one another.  Having the rod ends pinned against the end of their misalignment will cause premature wear and potential failure. The help clock rod ends the rod end can be rotated with a open wrench while the jam nut is held.  Note this only works to rotate into tight, if rotated towards loose then the jam nut will come unset.  That means LH would be rotated counterclockwise and RH(outer rod ends) would be clockwise relative to the rod end looking into the end of the tube.

 

Follow the quick install card that is included with the links and shown below and only use dry PTFE lube for lubrication.  Refer to our youtube guide on how to lubricate rod ends. Never grip the top nut

 of the taper stud assembly as this is a fixed nut to hold the stack of spacers to the stud.  Use an impact driver or taper pressure to allow starting of the retaining nut.


Toyota Supra 1993-1998

Write a review

Please login or register to review

FIGS TRACK SPEC TOE LINKS MKIV SUPRA

  • $376.69
  • $343.61


Available Options


Related Products

A BEST SELLER!!
BC RACING BR SERIES COILOVERS WITH SWIFT OPTION(RATE-BASED SELECTION)

BC RACING BR SERIES COILOVERS WITH SWIFT OPTION(RATE-BASED SELECTION)

At the '08 SEMA show we were looking for a coilover company willing to offer a solution for the Lexu..

$1,195.00 $1,245.00

BC RACING BR SERIES COILOVERS  ALL VEHICLE APPLICATIONS

BC RACING BR SERIES COILOVERS ALL VEHICLE APPLICATIONS

THIS IS OUR UNIVERSAL APPLICATION ORDER SHEET FOR ALL BC BR SERIES COILOVERS.FOR ORDERING PLEASE WRI..

$1,195.00 $1,245.00

SWIFT SPRING COILOVER UPGRADE

SWIFT SPRING COILOVER UPGRADE

Swift makes a second to none spring and FIGS is pleased to offer a specific upgrade option to any co..

$198.00

URETHANE BUMP STOP (JOUNCE) SPACERS

URETHANE BUMP STOP (JOUNCE) SPACERS

Dial in your up-travel stops on coil-over suspensions. These easy-to-use Jounce Bumper Spacers allow..

$18.00

"STUBBY" REAR SWAY ENDLINKS MKIV SUPRA LEXUS SC GS300

"STUBBY" REAR SWAY ENDLINKS MKIV SUPRA LEXUS SC GS300

"STUBBY" REAR SWAY BAR ENDLINKS Application TOYOTA MKIV SUPRA, LEXUS SC300/400, JZS147 GS300/A..

$210.00 $236.25

FIGS FRONT RACE-SPEC ADJUSTABLE UPPER CONTROL ARMS G1 G2 GS/SC430

FIGS FRONT RACE-SPEC ADJUSTABLE UPPER CONTROL ARMS G1 G2 GS/SC430

  Looking for more front grip at the track?  Looking for adjustment and clearance not offe..

$986.74

SUPERPRO ADJUSTABLE FRONT SWAY ENDLINKS MKIV SUPRA LEXUS SC

SUPERPRO ADJUSTABLE FRONT SWAY ENDLINKS MKIV SUPRA LEXUS SC

DESIGNED TO FIX SWAY BAR PRELOAD ISSUES Application TOYOTA MKIV SUPRA, LEXUS SC300/400  FRONT..

$130.79 $145.32

SUPERPRO ADJUSTABLE  SWAY ENDLINKS

SUPERPRO ADJUSTABLE SWAY ENDLINKS

DESIGNED TO FIX SWAY BAR PRELOAD ISSUES Application:     GEN4 GS rear &nbs..

$130.79 $145.32

BC RACING SWIFT SPRINGS

BC RACING SWIFT SPRINGS

Swift makes a second to none spring and FIGS is pleased to offer BC Racing branded Swift springs to ..

$170.00

Tags: mkiv, supra, toe, links, rear, toelinks, mark IV, turbo, 1994, 1994.5, 94.5 95, 96, 97, 98, 1995, 1996, 1997, 1998, toyota