Ask Question

Nearly 2 Years of development yields the first round of Outer Tie Rod Ends for the GS and LS and now we make things even better with more applications supported. Built to last and to offer some major adjustments, these tie rod ends are a must for any lowered vehicle to correct bump steer and toe settings in the front steering.

NOTE: since there is no indentation for stock wheel clearance, only wheels with an inner rim that will be 10-15mm (depending on spacer setting) more negative (outward) will work.  18" wheels min. are required.

Please check with FIGS if there is a question.

Features:

  • NEW 316 Stainless coupler for added strength
  • 4-piece Heavy Duty Precision FK rod end with PTFE liner.
  • Chromoly Tapered stud to adapt to stock Tie rod end mount.
  • Adjusts in length to allow arc centering.
  • Adjust rod end location for bump steer correction 
  • 2 outer tie rod ends with 3 adjustment spacers each.  1- 0.25" and 2- 0.4" spacers allow 1.5" of drop in steering location over stock
  • Install tapered stud into steering knuckle first.
  • Adjust number of spacers to get steering as level as possible under load.
  • Once spacer stack is achieved, tightened cap nut to 45-ft-lbs
  • It is strongly suggested to final mount all spacers and rod end with Loctite 620 or equivalent bearing mount compound.
  • Check nut frequently
  • If knocking occurs check for over travel, spacers may be hitting rod end on travel. 
  • Adjust the threads on the coupler and the rod end to have at least 5/8” of thread in the coupler, then tighten the jam nut.
  • Set toe as you would with an OE tie rod end (rotate inner tie rod end).

Kit includes:

  • 2 outer tie rod ends with 3 adjustment spacers each.  1- 0.25" and 2- 0.4" spacers allow 1.5" of drop in steering location over stock

Suggested installation:

  • Install tapered stud into steering knuckle first.
  • Adjust number of spacers to get steering as level as possible under load.
  • Once spacer stack is achieved, tightened cap nut to 45-ft-lbs
  • It is strongly suggested to final mount all spacers and rod end with Loctite 620 or equivalent bearing mount compound.
  • Check nut frequently
  • If knocking occurs check for over travel, spacers may be hitting rod end on travel. 
  • Adjust the threads on the coupler and the rod end to have at least 5/8” of thread in the coupler, then tighten the jam nut.
  • Set toe as you would with an OE tie rod end (rotate inner tie rod end).
Lexus IS300 2001-2005

Write a review

Please login or register to review

IS300 EXTREME DROP ADJUSTABLE V2 OUTER TIE ROD ENDS WITH BUMP STEER SPACERS

  • $336.26
  • $314.21


Related Products

GEN 1 GS300 JZS147 CASTER ARM #2 PRESS-IN POLYURETHANE BUSHINGS

GEN 1 GS300 JZS147 CASTER ARM #2 PRESS-IN POLYURETHANE BUSHINGS

The Long anticipated release is here.  These Urethane Bushings not only replace the worn proble..

$139.99 $155.54

GEN 1 GS300 JZS147 FRONT LCA #1 ECCENTRIC POLYURETHANE BUSHINGS

GEN 1 GS300 JZS147 FRONT LCA #1 ECCENTRIC POLYURETHANE BUSHINGS

These bushings replace the inner LCA bushing #1 on the front.  This is the eccentric ..

$139.99 $155.54

SUPRA  POLYURETHANE STEERING RACK BUSHINGS 47MM DIA RACK

SUPRA POLYURETHANE STEERING RACK BUSHINGS 47MM DIA RACK

Add some positive feedback to your steering with this complete cast poly bushing set.  Replaces..

$46.99 $52.21

GEN 2 GS  GS300/400/430 SC430 SOLID STEERING RACK BUSHINGS

GEN 2 GS GS300/400/430 SC430 SOLID STEERING RACK BUSHINGS

Driver Side The first of a series of solid bushing kits, these aluminum bushings press fit into the..

$82.69 $132.30

GEN2 GS SC430  POLYURETHANE STEERING RACK BUSHINGS

GEN2 GS SC430 POLYURETHANE STEERING RACK BUSHINGS

Add some positive feedback to your steering with this complete cast poly bushing set.  Replaces..

$52.99 $58.88

GEN 2 GS JZS16 SC430 ADJUSTABLE CASTER ARM #2 PRESS-IN POLYURETHANE BUSHINGS

GEN 2 GS JZS16 SC430 ADJUSTABLE CASTER ARM #2 PRESS-IN POLYURETHANE BUSHINGS

The Long anticipated release is here.  We have spent a lot of time and resources in 2012/2013 t..

$114.99 $127.77

A BEST SELLER!!
GEN2 GS JZS16 SC430 CASTER ARM #2 PRESS-IN POLYURETHANE BUSHINGS

GEN2 GS JZS16 SC430 CASTER ARM #2 PRESS-IN POLYURETHANE BUSHINGS

NOTE: PLEASE VERIFY O.D. OF YOUR BUSHING IMAGES ARE ONLY TO HELP YOU DETERMINE THE VARIATIONS IN THE..

$114.99 $127.77

GEN2 GS SC430  POLYURETHANE FRONT LOWER CONTROL #1 BUSHINGS

GEN2 GS SC430 POLYURETHANE FRONT LOWER CONTROL #1 BUSHINGS

If your car has some mileage on it or has been lowered chances are it has torn the #1 bushing apart ..

$54.99 $61.10

IS300 ADJUSTABLE CASTER ARM #2 PRESS-IN POLYURETHANE BUSHINGS

IS300 ADJUSTABLE CASTER ARM #2 PRESS-IN POLYURETHANE BUSHINGS

The long anticipated release is here, we have spent a lot of time and resources to make this happen...

$119.99 $133.32

MKIV SUPRA PERFORMANCE SWAY BAR SET

MKIV SUPRA PERFORMANCE SWAY BAR SET

Currently, we are importing a limited number of these bars.  Wait time could be a few months de..

$529.98 $588.87

Tags: Lexus, is300, outer, tie, rod, end, ends, adjustable, bump, steer, bumpsteer, lower, lowered, correction, tire, wear, cambered