Ask Question

We made a model specific handle assembly  for the IS300/Altezza  but it was time to take things further and make a universal handle base.The requirements were a lightweight rigid design that would complement our rear e-brake kit we proudly offer our compound linear hydraulic handle with standard master cylinder designed for the universal use. Like our other handle base, the mechanism guarantees linear actuation of the master cylinder providing bind free/leak free operation of the long term. Our new CNC handle adds an extremely light weight and ergonomic flair to the design with a trigger slot and a hex cap making it easy to grab during battle. 

 

Features:

  • 16ga formed and reinforced steel base cage construction.
  • Compound linear mechanism keeps master piston perfectly aligned and allows multiple leverage options.
  • Two types of 5/8" pistons offered.
  • PTFE-Bronze bushings used at friction interfaces for smooth action.
  • FIGS Exclusive lightweight HL(HEX-LATTICE) design in CNC machined aluminum.
  • Base is designed to use through hole bolts and washers in the hex perforation making multi-plane mounting possible to allow universal fitment and lighter mounting bracket designs.
  • Parking brake cam lock designed to not interfere during operation. 3 positions based on master cylinder throw
  • Complete solution weighs just under 3lbs with our CNC handle.
  • Integrated Reservoir
  • Wilwood integrated reservoir master cylinder


ADD PLUMBING LINES TO COMPLETE YOUR KIT!


Installation:

A mounting platform will need to be made to support the handle towards the outer edge of the lower baseplate.  The hex perforations at the corner can be used with a flange head bolt to spread the load out as much as possible.  If possible mount in 3 separate locations to split the load along 3 axes.  Verify cage does not flex in mounting position when the fluid system is bled and full pressure is applied.

 

 

Handle position can be adjusted via either of the 2 clevis mounts we suggest using a small Phillips head screw driver that is close to 5/16" to hold the handle pivot and idler pivot during adjustment to simply things.  Make sure bronze bushings are seated in the slot and mounting pivot prior to actuating.


Watch Mats Baribeau pilot his JZX100 with our handbrake in the saddle.


Write a review

Please login or register to review

UNIVERSAL HYPER HYDRAULIC (DRIFT) E-BRAKE COMPOUND HANDLE +MASTER

  • $347.29


Available Options


Related Products

FIGS IS300 PROANGLE STEERING KIT

FIGS IS300 PROANGLE STEERING KIT

Hundreds of hours of development and testing have produced the most advanced and complete steer..

$3,085.90

HYDRAULIC (DRIFT) E-BRAKE KIT IS300 GEN2 GS SC430 SINGLE WILWOOD

HYDRAULIC (DRIFT) E-BRAKE KIT IS300 GEN2 GS SC430 SINGLE WILWOOD

 This is a product that has been a huge hit for all the sedan drifters out there. A complete bo..

$780.57

FIGS PROANGLE STEERING KIT FOR THE 2GS/ARISTO AND SC430 CHASSIS

FIGS PROANGLE STEERING KIT FOR THE 2GS/ARISTO AND SC430 CHASSIS

The big body car PROAngle kits are ready. The New GS/ SC430 kits include everything similar to the I..

$3,526.90

DUAL WILWOOD HYDRAULIC (DRIFT) E-BRAKE KIT IS300 GEN2 GS SC430

DUAL WILWOOD HYDRAULIC (DRIFT) E-BRAKE KIT IS300 GEN2 GS SC430

This kit takes our Single Hydro E-brake kit and expands it to add another set of Wilwood calipers to..

$1,242.52

HYDRAULIC E-BRAKE HANDLE PLUMBING KIT

HYDRAULIC E-BRAKE HANDLE PLUMBING KIT

Add these line to your E-brake handle to complete the kit for an easy install. Works with our&n..

$120.00

Tags: hydraulic, ebrake, handbrake, hand, brake, ebrake, hydro, handle, base, master, cylinder, drift, hyper, driftbrake, cutbrake, linelock, line, lock