These bushings replace the staked rubber bushings on the Front Upper Control arms of the ISX50 platform and the Gen3 GS. 

Set includes 2-Bushing sets for to replace both arms.

includes grease

A bearing C-Clamp is strongly suggested for ease of install.  A bearing clamp service tool to access the area behind the knuckle to remove the old bushings.

Will only work on RWD.

Install:

Unbolt UCA via two inner bolts and separate the outer ball joint with a ball jount separation tool.

Support spindle with a coat hanger or tie down to the shock body.

Remove old bushing via any means possible but most effectively using a bearing clamp.

Lube new poly bushing and press in first, fill voids and coat the lead in transition.

Press in Complete Bearing cup

Press in cylinder shaft second

You done!

Remount the UCA and retorque ball joint and inner bolts.