These bushings replace the sealed spherical bearings on the factory arms with new 2 purethane bushings.
Total 4 bushings
A bearing C-Clamp is strongly suggested for ease of install. A press will work even better.
Unbolt UCA via two inner bolts and separate the outer ball joint with a ball jount separation tool.
Support spindle with a coat hanger or tie down to the shock body.
Remove old bushing via any means possible but most effectively using a bearing clamp.
Lube new poly bushing and press in first, fill voids and coat the lead in transition.
Press in Complete Bearing
Press in cylinder shaft second
Remount the UCA and retorque ball joint and inner bolts.
G1 G2 GS FRONT UPPER CONTROL ARM POLYURETHANE BUSHING JZS147 JZS16
- Brand: SuperPro
- Product Code: G1G2GS_BSH_UCA_SP3161k
- Availability: In Stock